Hello World!
Click on the Clustrmaps map to see where our visitors are from...
Google translation
Revision 2.05
13th October 2009
Ohms Law Quiz
Try a few calculations based on Ohms Law. For these you just need to use the three basic formulae Hopefully it´ll be a breeze. The important thing to remember is to use the correct version of the formula and to get get it the right way up (I= V/R is good but I=R/V is definitely NOT!). A simple visual aid to remembering the correct formula is the Ohms Law Triangle. Setting out V, I and R in this way reminds you that R = V over (divide by) R I = V over (divide by) R, or V = IR (I multiplied by R).
Work out the answers using pencil and paper; if you don't write out the problem you WILL get mixed up half way and end up with the wrong answer. Of course the answer is not just a number, it will be a certain number of Ohms or Volts or Amperes; but wait, there is worse to come - those Ohms Volts or Amperes are very probably going to be kilohms or millivolts or microamperes, right? So you have to show that in your answer. No good just writing 56. Fifty six What? maybe 56Ω? Well if the real answer was 56KΩ you are still wrong, your answer is a thousand times too small!
But don't worry, to get you off on the right track you should download our "Maths Tips" booklet, which shows you how to use your calculator with exponents and engineering notation to get the right answer every time.
Not got a scientific calculator? The "Maths Tips" booklet explains what you need (and what you don't need so you don't spend your money unnecessarily). If you don't want to buy a scientific calculator, you can always pick up a free one on the net. PC users can try Calc98 from www.calculator.org/download.html. Whichever calculator you choose remember that you should read the instructions to become familiar with the working methods you should use as these do vary from calcuator to calculator.
OK so now you have read these instructions, you are ready to start. Here is a way to set out a typical problem on paper so you (with practice) don't get confused.
Firstly write down what we know from the question, and what we don't know:
V = ?
I = 500mA (500 x 10-3Amperes) [500E-3 or 500EXP-3 when entering it into your calculator, depending on which model you use]
R = 50Ω
So we are given I and R and need a formula to find V; so looking at our Ohms law triangle we find:
V= I x R so we substitute the figures we are given for I and R to give:
V = 500E-3 x 50 (for E we press the E or EXP key and for - we press the change sign (+/-) key, NOT the minus (-) key. So we get:
V = 500E-3 x 50 = 25
Our answer is therefore 25V
Note: If you are using Calc98 for your calculations you need to set the View>Option>Display menu to Engineering (under the "Decimal" choices).
It would be a good idea whilst you are in this menu to select 2 from the "Decimals" drop down box to set the number of digits displayed after the decimal place. This will round your answer down to two decimal places, which is sufficiently accurate for most uses and stops you getting silly answers such as 4.66666666667µA, which would be so accurate that we couldn't practically measure it!
Ohms Law Calculations Practice - Resitance, Voltage and Current.
(Calculate your answers with pencil, paper and calculator, then check your answers below.)
Previous Page Top of Page Home Page